• 3rd party tested & verified ADA Compliant
• 350 lb/159 kg lifting capacity,
• Flange mounted with four anchor bolts
• Left or right side mounting
• Powered by the LiftOperator™ Intelligent Control System
• Wheel-A-Way mobility option provides flexibility to remove the lift
for events or storage
• Emergency Stop Switch
• Hand Control Activated Audible Safety Alert
• Activation Key to Prevent Unauthorized Use (Option)
• Downloadable Performance Log
• 3 Battery Charge Status LEDs
• Energy Efficient (20 times more efficient than common controls)
• Full Set of Operational Controls on Touch Pad
It shall be battery powered, comply with Americans With Disabilities Act Access Guidelines (ADAAG), and have a lifting capacity of 350 pounds.
The multiLIFT is capable of controlled linear actuation into the pool providing steady speed, support and clearance to the user. Symmetrical
design in the multiLIFT allows customers to install with a right or left facing chair to accommodate multiple pool geometries. Product shall include
battery, charger, battery console cover, waterproof control, a footrest and seatbelt assembly.
Manufacturer to provide technical support and assistance to confirm pool lift satisfies pool geometry or if another model is more appropriate.
b. Have a LiftOperator™ Intelligent Control System with the following capabilities:
i. Emergency stop button.
ii. Emergency audible alert system capable of activation via both handheld and system control.
iii. Service required LED with USB port.
iv. Full set of operation controls on the touch pad.
v. IP65 rated, constructed of high impact UV plastics with conformal coded circuitry.
c. Have a LINAK (approved for medical applications) screw/spline type actuator to provide a safe and stable stop at any point in the lifting cycle,
capable of:
i. 18.5 inches measured from the deck to the top of the seat surface when the seat is in the raised position.
ii. Submerging the seat a minimum of 18 inches below the surface of the water, at a deck to water level of 6 inches maximum.
d. Configured to facilitate ease in user transfer within clear deck space of 36 inches wide by 48 inches deep starting 12 inches from the back end
of the seat (Ref. ADAAG).
e. Seat:
i. Width of 18.5 inches (ADAAG Requires 16 inches).
ii. Back that extends 24 inches high (ADAAG Requires 12 inches).
iii. Ships in right seat mounting configuration (facing pool), field convertible to left.
f. Be structurally capable of providing a stable user transfer and pass a static load test equal to 1.5 times the rated load capacity.
g. Metallic parts (stainless steel and aluminum) to be passivated, pretreated and powder coated using a 5-step process. The process is to be
validated by samples undergoing a 4,000 hour Salt Fog Test (ASTM D1654), by a recognized independent laboratory, and achieve a rating
of 10 (highest possible rating). (Note: The test is the equivalent of 10 years exposure to this harsh environment.)
h. Have a Manufacturer’s Warranty:
i. Frame—3 Years (except powder coated finish)
ii. Electronic Components—2 Years (except battery)
iii. Batteries—1 Year, Pro-rated (90 days: 100%, 91 to 365 days: 50%)
iv. Have independent, third party verified ADA compliance.
v. Meet or exceed CE requirements (10535).
i. Have the following optional equipment:
900-2000 Stability Vest
500-5100 multiLift™ Cover
170-1000 Arm Rest Assembly
1001545 Two Button Control with Activation Key
500-5500 Wheel-A-Way Option